Acrylic Adhesives and Cements

Weld-On^® Acrylic Adhesives and Cements

Our acrylic adhesives and cements are well-known for providing clear, seamless bonds for use in the fabrication of signs, acrylic finished goods and for bonding acrylic to other thermoplastics. Our products are formulated with varying viscosities and cure times to meet your specific fabrication needs.

See the physical properties of Weld-On^® acrylic adhesives and cements and/or click on the individual product bulletin for additional details.

Product	Description	Available Sizes (SKU #)	SDS/ MSDS	Product Bulletin
	3™: Water thin, non-flammable, very fast-setting solvent cement for bonding acrylic. It will also bond with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate to themselves. It will not bond to cross linked acrylics. Low VOC* This product is not available in SCAQMD.	4 oz. (#10799) Pint (#10300) Quart (#12574) Gallon (#10299)
	4™: Water thin, somewhat flammable, moderately fast-setting, blush-resistant solvent cement for bonding acrylic. It will also bond with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), and polycarbonate to themselves. It will not bond to cross-linked acrylic. Low VOC*	4 oz. (#10308) Pint (#10307) Quart (#12755) Gallon (#10299)
	16™: Medium bodied, fast-setting, high strength acrylic cement. Also bonds rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces. Low VOC*	1.5 oz. (#10319) 5 oz. (#10315) Pint (#10314) Gallon (#10313)
	28™: Three-component, reactive, high strength acrylic based adhesive for bonding all acrylics, including cell cast, continuous cast, extruded, and cross-linked acrylic and molded parts. It will also bond acrylics to polyester (PET), cellulose acetate butyrate (CAB), polystyrene, wood, and other materials. Good weatherability. Meets Mil Spec A-8576C Type II. Low VOC*	Pint (#11780)
	40™: Two-component, reactive, high strength adhesive for bonding and fabricating all acrylics (extruded, cast, and cross linked) to each other. It will also bond acrylic to polyester, butyrate, PVC, ABS, PETG, etc. Can also be diluted with 3061™ thinner. Meets Mil Spec A-8576C Type lll. Low VOC*	4 oz. (#11267) Pint (#11266) Gallon (#11265)
	42™: Two-component, reactive, high strength adhesive for bonding acrylic, including extruded cell cast and continuous cast, as well as, molded parts and some cross-linked sheet. It will also bond acrylic to polyester, cellulose acetate butyrate (CAB), polycarbonate and other materials. Packaged in a two component cartridge (10:1 ratio) for use with a dispensing gun and static mixing tip. Meets Mil Spec A-8576C Type lll. Low VOC*	230 ml cartridge (#10987)
	1802™: Light bodied, medium-setting cement for bonding acrylic, ABS, cellulose acetate butyrate (CAB), rigid PVC, and polystyrene to themselves and to each other. This product may be used in SCAQMD in the manufacturing of orthotics and medical devices only.	Pint (#10351) Gallon (#10350)